- Before You start using your hose pipe for the first time, check that the rubber ring is installed inside the end of the hose that connects to water tap, or the hose may leak.
- Attach the side of the hose with the female fitting and the rubber ring to the water source. Attach the multi functional spray gun too.
- Turn the water on at the tap, allowing the water pressure in the hose to increase gradually, Do not start using the hose just yet. The hose will automatically expend up to 3 times its original length when full.
- When the hose in fully expended you can start using it like any ordinary garden hose pipe.
- The hose will not extend to its full length if your water pressure was below 4bars.
- High Water pressure of 12bars can burst the hose pipe.
- To prevent leaking make sure are the connections are tight enough.
- After Use, turn the water off at the tap, You can leave the hose pipe for short time if you plan to come back soon and use it again.
- When the hose pipe is not in use close the water tap, open the hose gun to allow the water in the hose to drain out. It will automatically extract back into its original size.
Irrigation and Washing in The Parks, Community, Factories and Families
Pets Bathing, Hose Cleaning
Car Washing, Garden Watering
1 X Expandable Garden Hose Pipe
1 X 8 Function Multi-Functional Spray Nozzle
1 x Tap Connector